Many of MOONS' motor drives are programmable or configurable with software. The Mis Programmer software makes motion control programming so easy, while ST Configurator is a powerful tool for setup and configuration of drives. For more information on the various software applications available visit the links below, and to check for the latest versions of all software applications go to the software downloads page.

Mis Programmer
Intended for use in stand-alone applications, Mis Programmer provides an extremely friendly, point-and-click, graphical interface that doesn't require any previous programming experience. Runs on IBM-compatible PC's running Windows XP, 2000, NT, ME, 98 or 95. Mis Programmer and a programming cable are included with each Mis-programmable drive.

Q Programmer
Q Programmer is used to create and edit stand-alone programs for Q-compatible drives. The functions of these drives include multi-tasking, math, register manipulation, encoder following, and more.

ST Configurator
Used for setup and configuration of ST series stepper drives. The functions include setting up motion parameters, monitoring motion status, programming I/O, and more. Runs on IBM-compatible PC's running Windows XP, 2000, NT, ME, 98 or 95.

eXposition
Used for setup and configuration of MS2035MXD drive. The functions include current setting, I/O configuration, etc. Runs on IBM-compatible PC's running Windows XP, 2000, NT, ME, 98 or 95.

SCL Utility
A simple terminal emulator designed to facilitate familiarization of host commands when using a SCL compatible stepper drives in host command mode. Runs on IBM-compatible PC's running Windows XP, 2000, NT, ME, 98 or 95.